Next Lower Daily Fixed 12m v157 vs Pod Point Plug & Power 24m v4 HH

Side-by-side comparison of Eon Next Next Lower Daily Fixed 12m v157 and EDF Pod Point Plug & Power 24m v4 HH using real UK smart-meter data. Modelled over 90 days ( — ).

Eon Next
Cheaper option

Eon Next Next Lower Daily Fixed 12m v157

Saves £49.41 over 90 days — around £200/yr annualised, on the modelled household.

Your own saving depends on when you use electricity. See how this is calculated.

Cost breakdown

  Eon Next
Next Lower Daily Fixed 12m v157
EDF
Pod Point Plug & Power 24m v4 HH
Total cost (90 days) £194.30 £243.71
Daily average £2.16 £2.71
Annualised £788/yr £988/yr

Monthly cost

Each bar is the modelled cost for that calendar month using the modelled household’s actual half-hourly consumption pattern.

Make it personal

See which is cheaper for your home

The figures above use a modelled household. Your own saving depends on when you use electricity — run this comparison against your real half-hourly smart-meter readings to see numbers that match your usage.

Bright smart-meter sync or CSV upload — free, no card needed.

About these tariffs

Eon Next
Eon Next

Next Lower Daily Fixed 12m v157

Standard Fixed Cheaper
Full details & per-region rates
EDF
EDF

Pod Point Plug & Power 24m v4 HH

Time of Use Fixed
Full details & per-region rates

Questions

Over the modelled 90-day period, Next Lower Daily Fixed 12m v157 worked out cheaper than the other tariff by £49.41 for a representative UK home. Annualised that is roughly £200 per year. Your own saving depends on when you use electricity - shift load into cheaper windows on either tariff for a larger gap.

Next Lower Daily Fixed 12m v157 is a standard tariff from Eon Next. Pod Point Plug & Power 24m v4 HH is a time of use tariff from EDF. They differ in how the unit rate is structured across the day, which is what drives the cost difference for households with shiftable load.

We take a real UK home's half-hourly smart meter data over the previous 90 days and model the bill on each tariff using the supplier's current published rates and standing charges. Standing charges scale with the modelled period; unit rates apply per half-hour using each tariff's rate structure (standard, Economy 7, time-of-use bands, or wholesale-tracking). Full methodology and data sources are linked below.

Both Eon Next and EDF publish per-region rates across the 14 UK DNO areas. Click through to either tariff page below to see the rates and standing charge specific to your DNO. Some tariffs require a smart meter or have other eligibility criteria set by the supplier.

The cost calculation rebuilds every night using current rates. Page caching is one hour so repeat visits within the day are fast. If a tariff's rates change mid-day, you will see the new numbers on the next nightly refresh.

How this comparison is built. Every cost figure on this page comes from modelling real half-hourly UK smart-meter data against each supplier’s current published rates and standing charges. The calculation refreshes nightly. We earn a small commission when a switch completes via a referral link — it does not affect the price you pay.

Read the full methodology Where the data comes from