Heat Pump Tracker 36m vs Freephase Static 12m v3

Side-by-side comparison of EDF Heat Pump Tracker 36m and EDF Freephase Static 12m v3 using real UK smart-meter data. Modelled over 90 days ( — ).

EDF
Cheaper option

EDF Freephase Static 12m v3

Saves £2.03 over 90 days — around £8/yr annualised, on the modelled household.

Your own saving depends on when you use electricity. See how this is calculated.

£50 sign-up bonus available

Cost breakdown

  EDF
Heat Pump Tracker 36m
 EDF
Freephase Static 12m v3
Total cost (90 days) £161.48 £159.45
Daily average £1.79 £1.77
Annualised £655/yr £647/yr
Calculated . Levy adjustment applied to dynamic-tariff slots pre-1 April 2026.

Monthly cost

Each bar is the modelled cost for that calendar month using the modelled household’s actual half-hourly consumption pattern.

Make it personal

See which is cheaper for your home

The figures above use a modelled household. Your own saving depends on when you use electricity — run this comparison against your real half-hourly smart-meter readings to see numbers that match your usage.

Bright smart-meter sync or CSV upload — free, no card needed.

Create free account How it works

About these tariffs

EDF
EDF

Heat Pump Tracker 36m

Time of Use
Full details & per-region rates
EDF
EDF

Freephase Static 12m v3

Time of Use Cheaper
Full details & per-region rates

Questions

Over the modelled 90-day period, Freephase Static 12m v3 worked out cheaper than the other tariff by £2.03 for a representative UK home. Annualised that is roughly £8 per year. Your own saving depends on when you use electricity - shift load into cheaper windows on either tariff for a larger gap.

Heat Pump Tracker 36m is a time of use tariff and Freephase Static 12m v3 is a time of use tariff, both from EDF. They differ in how the unit rate is structured across the day, which is what drives the cost difference for households with shiftable load.

We take a real UK home's half-hourly smart meter data over the previous 90 days and model the bill on each tariff using the supplier's current published rates and standing charges. Standing charges scale with the modelled period; unit rates apply per half-hour using each tariff's rate structure (standard, Economy 7, time-of-use bands, or wholesale-tracking). Full methodology and data sources are linked below.

EDF publishes per-region rates for both these tariffs across the 14 UK DNO areas. Click through to either tariff page below to see the rates and standing charge specific to your DNO. Some tariffs require a smart meter or have other eligibility criteria set by the supplier.

New customers signing up via the link on this page may receive a £50 credit. Bonus eligibility is determined by EDF at switch confirmation. We earn a small commission when a switch completes - this helps fund the site and does not affect your price.

The cost calculation rebuilds every night using current rates. Page caching is one hour so repeat visits within the day are fast. If a tariff's rates change mid-day, you will see the new numbers on the next nightly refresh.

How this comparison is built. Every cost figure on this page comes from modelling real half-hourly UK smart-meter data against each supplier’s current published rates and standing charges. The calculation refreshes nightly. We earn a small commission when a switch completes via a referral link — it does not affect the price you pay.

Read the full methodology Where the data comes from